Panel Size:

The panels typically range from 2.0 meters to 2.4 meters in width and 1.8 meters to 2.4 meters in height. Custom sizes are available depending on the site or application requirements.

Surface Treatment:

Hot-Dip Galvanization: Panels are often hot-dip galvanized to provide reliable protection against rust and corrosion, which is especially critical for outdoor applications.

PVC Coating: For enhanced durability and improved aesthetic appeal, panels can also be coated with PVC.

Material:

Electro-galvanized wire, Hot dipped galvanized wire, PVC wire

Post:

Round post, Angle iron post

Installation:

Equipped with metal posts on both sides and a stable base, easy to install and dismantle, suitable for a variety of occasions for temporary use, such as construction sites, sports venues, etc., through the connectors are fixed, you can quickly build a protective area, when not in use, easy to dismantle and mobile

Double loop tie wire is also named bag ties or rod ties, which is widely used as binding wire for garden supplies.

Ribbed Wire is a slender metal material with thread commonly used for connecting or fixing industrial equipment.

MATERIAL:

Low carbon steel Q195,Q235

SURFACE TREATMENT:

Polished, galvanized, no treatment

DIAMETER:

Can be customized according to customer needs (big cap nails diameter is 5.0mm or 5.2mm).

LENGTH:

Usually 1” to 6”(big cap nails are 150mm,200mm,250mm,300mm)

Galvanized Roofing Nail Supplier - Wire Mesh

A roofing nail is a specially designed fastener, typically made from sturdy materials and coated for corrosion resistance. Unlike common nails, they feature a wider head and specific shank designs to ensure a secure hold on roofing materials while preventing water infiltration and loosening due to weather exposure.

MATERIAL: Low carbon steel wire, galvanized wire, stainless steel wire

SURFACE TREATMENT: Galvanized

SIZE: Common size BWG9X2.5’

CHARACTERISTIC: Strong fixation, galvanized surface, and good corrosion resistance, which can extend the service life and have high cost-effectiveness.

How to Choose the Right Roofing Nails?

1. Match the Roofing Material: Different roofing shingle materials have recommended nail types and lengths.

2. Ensure Adequate Length: The nail must be long enough to penetrate and secure all the roofing layers that need fastening.

3. Consider Local Climate: In windy areas, always choose ring-shank nails for enhanced wind resistance. In humid, coastal regions, prioritize stainless steel nails.

4. Follow Building Codes: Many local building codes have specific requirements for the type, size, and spacing of roofing nails. Check these before starting work.

Material:

45 # steel, 60 # steel

Surface Treatment:

Galvanized, black coated

Length:

1” - 4”

Material:

galvanized wire.

MESH:

12X12,14X14,16X16,18X18,22X22,24X24

WIRE DIAMETER(mm):

0.23 0.25     0.21 0.23 0.25     0.21 0.23 0.25     0.19 0.21 0.23 0.25

0.17 0.19 0.21 0.23     0.17 0.19 0.21

Material:

Usually made of galvanized steel wire, high-density polyethylene (HDPE), high-quality plastic, aluminum alloy, stainless steel, etc., it is made according to the application and environmental conditions, and the material is adjusted according to the required customer needs

Construction:

It is woven by window screen weaving equipment, and its weaving method can be divided into two types: flat weaving and twisted weaving Its edge treatment can be divided into burrs, wrapped edges, and welded edges.

Characteristics:

Good insect repellent effect, good air permeability, light material, easy to clean, easy to transport, and affordable; the mesh screen is uniform, colorful and beautiful, and it is a substitute for glass fiber.

Application:

Window screen is widely used in industry, agriculture, animal husbandry, hotels and residential buildings to prevent mosquitoes and flies, and is strong and anti-theft. Insect screen is durable and strong.

Material:

fiberglass, PVC composition

Color:

mostly blue, white, black, green, etc.

Weight:

90g/㎡-120g/㎡.

Material:

Stainless steel welded wire mesh belt is usually used 302,304,316,316L,310,310S,601,etc.

Types:

Balance wire mesh belt, spiral link belt, wire link belt, chain driven conveyor belt, EY link conveyor belt, honeycomb conveyor belt.

Low-Carbon Steel:
The base material is low-carbon steel, which provides the wire with strength and durability while allowing it to be easily shaped and twisted.
Annealing Process:
The wire is heat-treated to increase its flexibility, making it easier to manipulate without breaking.